Installing Accelerometers using Conical Mount

Selecting the right accelerometer cable
19th May 2020
Detect bearing failure at the earliest possible stage
26th May 2020

Installing Accelerometers using Conical Mount

Hansford Sensors new HS-420 with Conical Mounting joins our existing range of 4-20mA transmitters. 

Conical mounts are easy to install and take up a small amount of space, providing a direct line to the bearing to ensure a safe vibration transmission for various applications.

Typical failure modes that can be detected include unbalance, misalignment, looseness and low speed bearing damage. Available options with 2 Pin MS or M12 Connector. Datasheet is available on our website here.

Learn more about installing accelerometers using Conical Mount with our application note.

Comments are closed.